Energy (Transmission)

Section 3 of the act defines 'advanced transmission technologies' as hardware or software technologies that increase the capacity, efficiency, reliability, or resiliency of an existing or new transmission facility.     Section 4 requires the Colorado public utilities commission (commission) to adopt rules requiring a regulated electric utility to consider advanced transmission technologies in the electric utility's 10-year transmission plan and to identify strategies to reduce the costs of, and obtain financing for, new transmission. The commission is directed to minimize duplication of transmission planning processes, technical studies, or analyses conducted through an applicable regional transmission organization or independent system operator.     Section 5 requires the Colorado electric transmission authority (authority) to, as much as practicable, engage and coordinate with formal subregional transmission planning organizations.     Under current law, the authority is required to annually submit a report of its activities, including a complete operating and financial statement covering the operations of the authority for the previous state fiscal year, to certain committees of reference of the general assembly. Section 6 requires that the annual report also include a description of the activities and accomplishments of the authority during the previous calendar year.     Section 7 adds a nonvoting seat to the authority's board of directors for the director of the commission or the director's designee.     Section 8 clarifies that a project that includes advanced transmission technologies and meets certain criteria is an energy sector public works project. Section 9 states that an energy sector public works project that includes advanced transmission technologies must meet applicable prevailing wage requirements and apprenticeship utilization requirements.(Note: This summary applies to this bill as enacted.)

Under current law, each subscriber to a community solar garden receives a net metering credit to their electric bill. The community solar subscriber organization can choose between a fixed bill credit or a bill credit that is adjusted annually. The act states that, on and after October 1, 2026, a subscriber organization may choose a fixed bill credit for the subscriber organization's income-qualified subscribers and a bill credit that changes annually for the subscriber organization's other customers. The public utility providing the bill credit must adjust the fixed bill credit annually to ensure that the credit remains aligned with changes in electricity rates over time.     A public utility is permitted under current law to recover its prudently incurred costs to facilitate a timely interconnection of a distributed energy resource. The act prohibits a public utility from requiring an interconnection customer to pay the costs associated with interconnection facilities and upgrades until 30 days before the public utility incurs the costs. The act allows a public utility to require an interconnection customer to provide security for the estimated full costs of interconnection at the time of mutual execution of an interconnection agreement.     The act requires a public utility with more than 500,000 customers in the state to, on or before August 15, 2026, convene a working group to accelerate distributed generation interconnection. The working group is tasked with discussing, if applicable, a cluster and batch study process for interconnection studies and a process for the public utility to accept a surety bond for interconnection upgrade work. The working group is also directed to discuss, and the public utility is required to implement, a process for third-party interconnection studies and upgrades.     On or before December 15, 2026, the public utility is required to file a notice with the public utilities commission (commission) that includes a report on any recommendations of the working group. The public utility is directed to make appropriate filings to implement any recommendations of the working group that require commission approval on or before January 1, 2027.     The act specifies that any interconnection upgrades and related utility construction work performed by a contracted third party must meet applicable safety, reliability, labor, and technical standards.     The act amends the definition of 'dispatchable distributed generation' and requires the commission to evaluate the size of off-site renewable distributed generation or storage facility and installation limitations as part of a future renewable energy standard compliance plan.(Note: This summary applies to this bill as enacted.)

The act authorizes a local government with permitting authority over land uses (local government) to designate one or more areas within the jurisdiction of the local government as renewable energy reinvestment areas for the siting of renewable energy and energy storage system projects (eligible projects). In designating an area as a renewable energy reinvestment area, the local government must hold at least one public hearing and hold at least one public hearing for any construction permit applications required for a proposed eligible project in the renewable energy reinvestment area or must designate the area as part of an urban renewal plan or county revitalization plan and ensure that any outreach to and engagement of disproportionately impacted communities is consistent with statutory requirements. A local government cannot designate an eligible site within tribal lands without first consulting with the tribe with jurisdiction over the lands.     If an eligible project is sited in a renewable energy reinvestment area, an urban renewal authority or county revitalization authority (authority) may distribute tax increment revenue to finance or reimburse costs associated with the eligible project if the renewable energy reinvestment area is included in the authority's urban renewal plan or county revitalization plan.     In response to a request made by a local government or an eligible project developer for information regarding a designated renewable energy reinvestment area, a utility is required to acknowledge the request and provide the requestor readily available information within 30 days after the request is made.     The Colorado energy office is required to consolidate, publish on its website, and periodically update technical and informational resources concerning the process for siting, permitting, and developing eligible projects in renewable energy reinvestment areas.(Note: This summary applies to this bill as enacted.)

The act defines, and creates requirements for, portable-scale solar generation devices. In addition, the act prohibits a provider of retail electric service or wholesale energy from, among other things, requiring a customer to obtain the provider's approval before installing or using a portable-scale solar generation device. The act also prohibits a person from directly or indirectly unreasonably prohibiting the installation, use, or operation of a portable-scale solar generation device. A covenant or restriction that explicitly or indirectly unreasonably prohibits or restricts the installation, use, or operation of a portable-scale solar generation device is unenforceable and void as a matter of public policy, though a real property owner may require reasonable restrictions.     The act clarifies that a portable-scale solar generation device is considered an energy efficiency measure on and after January 1, 2027, and a unit owners' association of a common interest community is therefore not permitted to prohibit the installation or use of a portable-scale solar generation device. However, a real property owner that resides in a common interest community and installs a portable-scale solar generation device may be required to reasonably secure the device to their unit and may be responsible for all liability and costs associated with the device's installation, maintenance, or removal.     The act specifies that a provider of retail electric service or wholesale energy is not liable for any damage caused by a portable-scale solar generation device and requires that the installation of a portable-scale solar generation device be in accordance with fire code requirements and applicable building codes that pertain to health and safety.     Under current law, a utility that is subject to regulation by the public utilities commission (commission) must allow for customer ownership and use of a meter collar adapter through the utility's interconnection standards. The act requires the commission, on or before December 31, 2026, to revise existing commission interconnection rules to explicitly require commission-regulated utilities to:Maintain a public list of at least one approved meter collar adapter;Have a process for approving a meter collar adapter that is not included in the public list;Approve proposed meter collar adapters that meet certain technical requirements;If the installation of an approved meter collar adapter requires relocation of the meter enclosure or replacement of the meter housing, provide an estimate of costs associated with this work upon request of the customer;Establish and publish a process for a customer to request and install a meter collar adapter; andFacilitate the installation of a meter collar adapter by a registered electrical contractor and require that all electrical work be performed by a qualified party such as a master electrician.     In addition, the act states that the revised commission interconnection rules must allow commission-regulated utilities to require that installation work for a meter collar adapter be performed by the commission-regulated utility, a licensed electrical contractor, or a party approved by the commission-regulated utility if the installation of an approved meter collar adapter requires removal of the meter.     The act requires cooperative electric associations and customer-generators to comply with the rules adopted by the commission regarding meter collar adapters and with other commission rules regarding production meters.     Similarly, the act requires municipally owned utilities to:Maintain a public list of at least one approved meter collar adapter;Have a process for approving a meter collar adapter that is not included in the public list;Approve proposed meter collar adapters that meet certain technical requirements;If the installation of an approved meter collar adapter requires relocation of the meter enclosure or replacement of the meter housing, provide an estimate of costs associated with this work upon request of the customer; andInclude a process for a customer to request and install a meter collar adapter. (Note: This summary applies to this bill as enacted.)